Repair Kit 4.08 Tension Load Cell

Repair Kit 4.08 Tension Load Cell

Crown's CKT200 repair kit has everything you need to replace critical components (seals, o-rings, and bleed screws) for 4.08 brass load cell.

SKU: CKT200

Load cell repair and maintenance is important to make sure that gauges are reading accurately.  When recharging and bleeding a system, a quick check of the load cell components will determine if you need a repair kit.   Crown offers a complete repair kit for 4.08 tension load cells. In this kit you will find all of the seals needed to replace any faulty or worn out part.  This kit includes brass rings, set screws and seals.

 

Please refer to the service manual for proper installation of this repair kit.

4.0Load Cell Repair Kit for Tong Sensor
  • 4.0Load Cell Repair Kit for Tong Sensor

    4.0Load Cell Repair Kit for Tong Sensor

  • Tong Line Pull and Tong Torque Gauges

    Tong Line Pull and Tong Torque Gauges Can Be Configured to Use 4.0 Load Cell

  • 4.0 Tension Load Cell Uses CKT200