PC Series All Stainless Steel Process Gauge

PC Series 2.5 and 4 Inch All Stainless Steel Process Gauge

Stainless Steel Process GaugeBuilt with 316 stainless steel, Crown’s PC Series all stainless steel process gauge is available in all-welded, 2.5 inch and 4 inch sizes. These glycerin-filled gauges resist vibration and pulsation, delivering accurate, consistent measurement. Heavy duty stainless steel internals provide added durability in corrosive applications, even in the toughest industrial conditions.  Crown’s all stainless process gauges will stand up to corrosive and noncorrosive applications in water, oil and gas, and a variety of industrial applications.

 

 

Certification

Crown’s PC Series All Stainless Steel, Fluid-filled Gauges are calibrated and certified accurate to 1.6% of span (ASME B40.1 Grade 1A). All accuracy certificates are traceable to National Institute of Standards & Technology (NIST) Standards.

Specifications for Stainless Steel Process Gauge

  • Dial – 2.5” (63 mm) or 4″ (100 mm)
  • Case – Stainless steel, welded stem-to-case connection, liquid-filled
  • Wetted parts – 316 stainless steel
  • Bezel – stainless steel, fixed, crimped
  • Lens – Polycarbonate
  • Pointer – Sharp End, Fixed, Black Aluminum
  • Connection – ¼” NPT
  • Scale – Standard: psi/BAR (x100 = kPa)
  • Ambient Temperature –
    • Glycerin Filled – 30⁰ F to 160⁰ F
    • Dry – -30⁰ to 180⁰ F

Available Configurations

Dial Size Connection Mounting
2 1/2” (63 mm) 1/4” NPT Center Back Mount
2 1/2” (63 mm) 1/4” NPT Lower Mount
2 1/2” (63 mm) 1/4” NPT Center Back Mount with Front Flange
2 1/2” (63 mm) 1/4” NPT Center Back, Panel Mount
4” (100 mm) 1/2” NPT Lower Mount, Crimped Ring
4” (100 mm) 1/2” NPT Lower Mount, Removable Ring
4” (100 mm) 1/2” NPT Center Back Mount with Front Flange

Download the PC Series Data Sheet PDF

Download Data Sheet