CTT100-03 20K Tong Line Pull System

20K Tong Line Pull System -- CTT100-03

CTT100-03 20K Tong Line Pull System comes complete with 20K Tong Line Pull Gauge, 25 Ft. Hose Assembly, and 6.53 Tension Load Cell.

SKU: CTT100-03

Buy 20K Tong Line Pull System -- (CTT100-03)

Need a 20K Tong Line Pull System (CTT100-03) right away? Save time and buy online. You'll get our same high quality, accurate, dependable instrumentation all at factory direct pricing. These tong systems are universal and can be used with any manual tong with a max torque of up to 20,000 lbs. Each 20K Tong Line Pull System (CTT100-03) comes complete with the following:

  • CG600-03 6", 20K tong line pull gauge
  • CH113-25 25 ft. low pressure hose assembly (complete with quick disconnects)
  • CTC107 6.53 tension load cell line pull sensor for 0-25,000 lbs. single line load
  • CW15 quart of all weather instrument oil
  • Calibration certificate 
  • Load Test certificate

Crown 20K Tong Line Pull Systems (CTT100-03) are durable, reliable and dependable, providing years of service in the field. All of our instrumentation is made right in our factory in Louisiana, USA, and we pride ourselves on knowing that you'll be getting the highest quality instrumentation, all at factory-direct pricing. 

Crown's CG600-03 six inch gauge is fluid filled to stand up and resist damage from constant vibrations, knocks, and wear. Each gauge is equipped with a 360 degree dial with red target pointer to make sure the operator hits his target torque each time. All Crown gauges are easy to repair, for years of dependable worry-free service. 

Crown's 6.53 tension load cell (CTC107) is designed to work with a single line load up to 25,000 lbs. Each 6.53 tong cylinder is machined in our facility so you know you're getting the best, most dependable tong cylinder on the market. Easy to repair in the field, CTC107 repair kits are available in our online store. 

All Crown systems are load and pressure tested traceable back to NIST. Each system comes with a load test certificate for the tong cylinder and a calibration certificate for the gauge. Our systems are charged with fluid, quality tested,  and ready to be used right out of the box. 

Need more information about our tong systems? Please visit this page for more information.   Not sure if you need universal tong line pull system, more about these gauges on our tong torque blog page. 

 

Buy 20K Tong Line Pull System
  • Buy 20K Tong Line Pull System

    Tong Line Pull and Tong Torque Gauges

  • Tong Cylinder in 20K Tong Line Pull System

    Tong Cylinder and 25 ft. Hose Assembly

  • CKT202 Repair Kit Also Available for 6.53 Tong Sensor